NEC SL1100

Sometimes a single user will need their own outbound Caller ID – for instance, if the user has their own private DID. This Tech Tip will demonstrate how to change a displayed caller id number on an outbound call made from the NEC SL200 or NEC SL1100. (IP extensions only)

Continue reading “Changing Outbound Caller ID of an IP Extension on the NEC SL2100 and SL1100”

In a previous tip, we showed how to stop specific extensions from ringing when an incoming call comes in. This Tech Tip demonstrates how to make an extension ring only when a call comes in on a specific incoming phone line(s). This tip applies to both the NEC SL200 or NEC SL1100.

Continue reading “Ringing an Extension when a Call Comes in on Specific Phone Line(s)”

This Tech Tip demonstrates how to program an NEC Door Phone (Door Box) and assign extensions that will ring when the chime is activated. This tip applies to only NEC SL1100 Phone System.

Continue reading “Programming a Door Phone on the NEC SL1100 and Assigning Extensions to Ring”

This Tech Tip demonstrates how to configure an AP20 DECT base station and ML440 DECT cordless VoIP handset using Plug and Play Registration. This tip applies to both the NEC SL2100 and NEC SL1100 phone systems.

Continue reading “Configuring AP20 and ML440 VoIP DECT Cordless on the NEC SL2100 and SL1100”

This Tech Tip demonstrates the various timers used to send calls to Voicemail. We will give examples of incoming calls coming over POTS (CO) Lines, DIDs and Internal Transferred Calls. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Timers for Sending Calls to Voicemail on the NEC SL2100 and SL1100”

A common example for this Tech Tip would be a lawyers office, after hours, where the attorney might pick up a call if it is relevant to what they are working on, but doesn’t want to be disturbed by the constant ringing of the phone. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Show Caller ID Without Ringing the Phone on the NEC SL2100 or SL1100”

This Tech Tip demonstrates how to program a trunk so that only one extension may use it for inbound or outbound calls – effectively creating a private line. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Creating a Private Line on the NEC SL2100 or SL1100”

The NEC PCPro Software offers a report that allows you to compare they system’s currently programmed value against the NEC default values. If your system functions properly at default, but has issues with the programmed data, then comparing the two may assist with determining what might be causing the problem. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “NEC SL2100 & SL1100 Database Troubleshooting”

This Tech Tip will demonstrate how to share one NEC SL2100 or SL1100 phone system between multiple companies and provide examples of how to program Incoming Calls, Sending Calls to Voicemail, Setting the Trunk Destination to Voicemail and Outgoing Calls. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Two Companies Sharing One NEC SL2100 or SL1100”

Mobile Extensions allow a mobile phone to act as an extension off of the SL1100 Phone System. A user can use their cell phone receive calls and make calls as if they were at their office desk. Four Mobile Extensions are included with the KSU. This tip applies to both the NEC SL1100 Phone System only.

Continue reading “Mobile Extension Setup on the NEC SL1100”