Tech Tips

Automatic Trunk Line Seizure means that a phone line is automatically grabbed when the phone handset is lifted. This can be set using the PCPro Programming Software for both the NEC SL2100 and NEC SL1100 phone system.

Continue reading “Automatic Trunk Line Seizure on the NEC SL2100 and SL1100”

This Tech Tip demonstrates how to set up a personal line, in which a CO Phone Line rings only one specific extension.

Continue reading “Make a Line Ring a Specific Extension on the NEC SL2100 and SL1100”

This Tech Tip demonstrates how to make a specific extension (station) not ring, when a call comes in to the NEC SL2100 or NEC SL1100

Continue reading “Excluding an Extension from Ringing on the NEC SL2100 and SL1100”

Sometimes a single user will need their own outbound Caller ID – for instance, if the user has their own private DID. This Tech Tip will demonstrate how to change a displayed caller id number on an outbound call made from the NEC SL1200 or NEC SL1100. (Digital extensions only)

Continue reading “Changing Outbound Caller ID of a Digital Extension on the NEC SL2100 and SL1100”

Sometimes a single user will need their own outbound Caller ID – for instance, if the user has their own private DID. This Tech Tip will demonstrate how to change a displayed caller id number on an outbound call made from the NEC SL200 or NEC SL1100. (IP extensions only)

Continue reading “Changing Outbound Caller ID of an IP Extension on the NEC SL2100 and SL1100”

In a previous tip, we showed how to stop specific extensions from ringing when an incoming call comes in. This Tech Tip demonstrates how to make an extension ring only when a call comes in on a specific incoming phone line(s). This tip applies to both the NEC SL200 or NEC SL1100.

Continue reading “Ringing an Extension when a Call Comes in on Specific Phone Line(s)”

This Tech Tip demonstrates how to program an NEC Door Phone (Door Box) and assign extensions that will ring when the chime is activated. This tip applies to only NEC SL1100 Phone System.

Continue reading “Programming a Door Phone on the NEC SL1100 and Assigning Extensions to Ring”

This Tech Tip demonstrates how to configure an AP20 DECT base station and ML440 DECT cordless VoIP handset using Plug and Play Registration. This tip applies to both the NEC SL2100 and NEC SL1100 phone systems.

Continue reading “Configuring AP20 and ML440 VoIP DECT Cordless on the NEC SL2100 and SL1100”

This Tech Tip demonstrates the various timers used to send calls to Voicemail. We will give examples of incoming calls coming over POTS (CO) Lines, DIDs and Internal Transferred Calls. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Timers for Sending Calls to Voicemail on the NEC SL2100 and SL1100”

A common example for this Tech Tip would be a lawyers office, after hours, where the attorney might pick up a call if it is relevant to what they are working on, but doesn’t want to be disturbed by the constant ringing of the phone. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Show Caller ID Without Ringing the Phone on the NEC SL2100 or SL1100”