Tech Tips

This Tech Tip demonstrates how to program a trunk so that only one extension may use it for inbound or outbound calls – effectively creating a private line. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Creating a Private Line on the NEC SL2100 or SL1100”

The NEC PCPro Software offers a report that allows you to compare they system’s currently programmed value against the NEC default values. If your system functions properly at default, but has issues with the programmed data, then comparing the two may assist with determining what might be causing the problem. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “NEC SL2100 & SL1100 Database Troubleshooting”

This Tech Tip will demonstrate how to share one NEC SL2100 or SL1100 phone system between multiple companies and provide examples of how to program Incoming Calls, Sending Calls to Voicemail, Setting the Trunk Destination to Voicemail and Outgoing Calls. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Two Companies Sharing One NEC SL2100 or SL1100”

Mobile Extensions allow a mobile phone to act as an extension off of the SL1100 Phone System. A user can use their cell phone receive calls and make calls as if they were at their office desk. Four Mobile Extensions are included with the KSU. This tip applies to both the NEC SL1100 Phone System only.

Continue reading “Mobile Extension Setup on the NEC SL1100”

This Tech Tip demonstrates some common Hotel/Motel applications, such as Extension Numbering, Wake-Up Calls, 1-Digit Dialing, and DSS Console setup. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Basic Hotel Motel Application on the NEC SL2100 or SL1100”

This Tech Tips demonstrates how to configure a T1/PRI card, including DID translations and DID Mode Switching. This tip applies to the NEC SL1100 Phone System only.

Continue reading “Configuring a T1/PRI Card on the NEC SL1100”

The SL1100 can be programmed to run auto-attendants for two companies. This Tech Tip will demonstrate how each company can have its own dedicated phone lines assigned to their own Call Routing Mailboxes (Auto Attendants). Each company will be set-up to use a 24-7 Part-Time Attendant with their own respective greetings. This tip applies to the NEC SL1100 Phone System Only.

Continue reading “Multiple Company Auto Attendants on One NEC SL1100 Phone System”

This Tech Tip demonstrates how to program a dial-by-name directory using the party’s first name. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Dial-By-Name Directory on the NEC SL2100 or SL1100”

This Tech Tip demonstrates how a user can record an Auto Attendant Greeting using a telephone. This tip applies to both the NEC SL2100 and NEC SL1100 Phone System.

Continue reading “Recording an Auto Attendant Greeting Using a Phone”

This Tech Tip demonstrates how to use the PCPro Programming Software to set the the time and date of the phone system. This tip applies to both the NEC SL1100 only.

Continue reading “Setting the Time & Date Using PCPro on the NEC SL1100”